Optional Software - evertz 4025TR Instruction Manual

4 OPTIONAL SOFTWARE

OPTIONAL SOFTWARE
There are several software options that are available for the 4025TR to
extend its capabilities for specialized applications.
options are only available when you are using the KeyLog TRACKER™
software to control the 4025TR. At the current time the options available
are:
•
35mm 3 perf Format
•
35mm 8 perf Format
•
65/70mm Formats
•
ARRI Timecode Processing for 16mm and 35mm 4 perf
When you purchase options for your KeyLog TRACKER™/4025TR, you
will be required to enter an authorization code in the KeyLog TRACKER™
software to activate them.
hardware ID that is used to generate a unique authorization code for the
combination of options that your system has.
In order to purchase optional software for your system contact the factory
and be prepared to give the Hardware ID, and a list of options currently
enabled in your system. This is shown on the Options screen Register tab
as shown below. It can also be shown on the 4025TR VCG by pressing
the SHIFT + STATUS keys twice.
When you have purchased new optional features the factory will supply you
with an 8-digit authorization code. To enable the optional software, enter
the authorization code supplied from the factory into the Authorization
Code text box on the KeyLog TRACKER™ Register Options screen and
click the "Authorize" button. The new options will be shown on this screen
when they are enabled in the 4025TR. You will have to close the program
and re-open it to activate the optional software in KeyLog TRACKER™.
Model 4025TR Film Footage Encoder Manual
Each 4025TR Film Footage Encoder has a
These specialized
Page 4-1