Connector Pinouts And Cable Diagrams; Connector Pinouts; Parallel I/O; Serial I/O - evertz 4025TR Instruction Manual

7. CONNECTOR PINOUTS AND CABLE DIAGRAMS

7.1 CONNECTOR PINOUTS

CONNECTOR PINOUTS AND CABLE DIAGRAMS
7.1.1

Parallel I/O

The 4025TR is fitted with a nine pin subminiature 'D' connector for
connection to the telecine. The pin connections are described below:
Pin Name
5 CENTRE
9 GAUGE
4 RESERVED
8 GPI
3 BIPH 1
7 BIPH 2
2 FRID
6 GND
1 RATE
* Run/Hold function only in 'RUN EDGE' mode.
Zero ref function only when telecine stopped.
Data log trigger in all modes, stopped or in play.

7.1.2 Serial I/O

The 4025TR is fitted with a nine pin subminiature 'D' connector for
connection to a computer running the KeyLog TRACKER™ software. The
pin connections are described below:
Pin Name Description
5 TxD
9 STS
4 RxC
8 RxA
3 RxB
7 TxB
2 TxA
6 TxC
1 VCG
Model 4025TR Film Footage Encoder Manual
Description
Centre Film Frame in Gate
Low=35 mm, High = 16 mm
Do not connect
Run / Zero Reference Frame *
Leading Biphase
Lagging Biphase
FDL-60 FRID pulse input
Ground
Film Rate
NTSC: Low = 24, High = 30
PAL: Low = 25, High = 25
RS-232 Transmit (+9V)
Status display control input
Receive Common (Frame Gnd)
Receive "A" (-) & RS-232
Receive "B" (+) (In 5)/Gen time display control input
Transmit "B" (+) (In 4)/Reader 2 display control input
Transmit "A" (-) (In 7)/Keykode display toggle
Transmit Common (Frame Gnd)
Video display control input
(GPO)
Page 7-1