Table of Contents
Advertisement
2.5.
CONNECTING THE 5010-SIE TO THE VTR REMOTE CONTROL PORT
5010-SIE to Panasonic AJ-D350/351 D3 Video Recorder RS-232C control Port
5010 END
9 PIN MALE "D"
DESCRIPTION
Ground
RS-232 Transmit
Ground
RS-232 Receive
2.6.
USING THE OPTIONAL MODEL 7225 TIME CODE / STATUS CONVERTER
INSTALLATION
The 5010-SIE serial remote control port is designed to communicate with
the RS-232 port on a Panasonic AJ-D350 VTR. This remote port is used to
obtain timecode and status information from the VTR. The serial port on
the VTR should be set to 9600 baud, 8 bits, no parity. The wiring diagram
below can be used to make an appropriate cable.
PIN
1
--------------------------------------------------------
5
--------------------------------------------------------
6
--------------------------------------------------------
8
--------------------------------------------------------
When the 5010-SIE is used with other VTR's which do not contain a
dedicated RS-232 port for timecode and status (as does the Panasonic AJ-
D350) then the 7225 Time Code/ Status converter is used to provide time
code and VTR status to the 5010-SIE. The 7225 receives LTC from the
timecode track of the VTR and machine status from its parallel remote
control port, and converts this information into a serial data stream that is
compatible with the Panasonic AJ-D350's remote port. The 7225 serial
port is connected to the 5010-SIE serial remote port. Power for the 7225 is
obtained from an external DC power pack.
2.6.1. Model 7225 Rear Panel Connections
FROM MACHINE
TIME CODE
1/4" STEREO
PHONE JACK
Figure 2-2: 7225 Rear Panel Connections
Model 5010-SIE Source ID Encoder Manual
TRANSPORT STATUS
5
1
10
6
15
11
15-PIN
HIGH DENSITY
D-SUB
AJ-D350 END
25 PIN MALE "D" TYPE
PIN
DESCRIPTION
1
Frame Ground
3
RS-232 Receive
7
Signal Ground
2
RS-232 Transmit
SERIAL I/O
5
1
9
6
9-PIN
D-SUB
Page 2-5
Advertisement
Chapters
Table of Contents
