Initiating A Software Upgrade; Accessing Information About This Module And Its Firmware - evertz 7700 Manual

7700 MultiFrame Manual
7711HDC HD Broadcast Quality Down Converter

6.11.3. Initiating a Software Upgrade

Utilities
Upgrade
Cancel
Upgrade

6.11.4. Accessing Information About this Module and its Firmware

Utilities
About...
7711HDC - 34
This control is used to initiate an upgrade of the module software.
In addition to the software upgrade support detailed in the Upgrading
Firmware chapter in the front of the binder, you can initiate an upgrade
with this control. This will allow you to upgrade the software without
unplugging the card and changing the upgrade jumper.
After selecting the upgrade operation, you must change the command
to Upgrade and press the pushbutton before the upgrade can take
place. Follow the remainder of the instructions in the Upgrading
Firmware chapter. You can abort the operation by pressing the
pushbutton when Cancel is displayed.
After the upgrade has finished, the unit will automatically restart and
run in normal operating mode.
This control lists the basic information about this module and the firmware
residing within it. It gives quick access to information about revisions that
can be used to determine when upgrades are required.
Revision 1.1