Controlled Program Recorders - Thermo Scientific SmartView SV100A User Manual

Recommended Spare Parts
Controlled Program
Recorders
B-2 SV100/SV10C User Guide
The following spare parts are recommended for installations that require
minimum downtime. Installations with 10 or more recorders should have
at least two sets of recommended spare parts.
(*) Indicates spare parts that are recommended for normal service support.
Table B-2.
Item Qty P/N
1 1* CB100496C01
1* CB100496C02
1* CB100496C03
1* CB100496C04
2 1* CB100475C01
3 1* CB100511C01
4 1* FU100030C13
5 1* FU100022C01
6 1* KT100347-01
1* KT100347-02
7 1* PA100259-08
1* PA100259-09
NOTES:
A – This part is recommended only when this option has been purchased.
B – This part may be used up to three times in each unit.
Description
PCB assembly: ADC board, 6 input; mA, mV, TC
PCB assembly: ADC board, 6 input; mA, mV, TC, RTD
OR
PCB assembly: ADC board, 6 input; mA, mV, TC, 2-wire transmitter
power supply
OR
PCB assembly: ADC board, 6 input; mA, mV, TC, RTD, 2-wire
transmitter power supply
PCB assembly: GPIO relay board
Power supply assembly
Fuse – 5 x 20 mm, 1.6 A, time delay
Fuse: Subminiature, plug-in, radial, 1.6 A (2-wire transmitter option,
CB100496-03 or -04 ADC board)
Kit, SV100A Chassis with 1.0 GB CF Card
Kit, SV100A Chassis with 2.0 GB CF Card
1.0 GB Compact Flash Card
2.0 GB Compact Flash Card (Secondary CF Card Only)
Notes
A, B
A, B
A, B
A, B
A, B
A, B
Thermo Fisher Scientific