Thermo Scientific SmartView SV100A User Manual page 109

Thermo Fisher Scientific
 Point resets: Points that may be reset, such as totalizers, are displayed
with the actual value at the time of reset. Some point types such as HI
PEAK may have two entries. The first entry is the date and time that
the high peak occurred, with the peak value. The second entry, above
it, is the actual time the reset occurred, along with the value at that
time.
 Power On/Off: The date and time of the unit power on/off is
displayed.
 Changes in event switch status, such as an input contact closure
(event).
Figure 6–20. Typical Alarm/Event Summary screen
1. Screen definition:
Figure 6–21. Alarm/Event Summary: Screen definition
a. Type: Select Alarm/Event.
b. Title: Press the input box and use the keyboard to enter the title
you want to give this screen. Press OK.
2. Press Apply.
Screen Types
Alarms/Events Summary Screen
SV100A/SV10AC User Guide 6-11