Point Programming
Programming
5-14
SV100A/SV10AC User Guide
4. Press Next.
5. Alarm limits screen: Refer to the Similar Programming Parameters
section for instructions.
6. Press Apply.
RTD
RTD type points are used to measure temperature.
1. Type screen: Select the RTD type and press Next.
Figure 5–15. RTD type point programming: Type screen
2. Display Scale screen:
Figure 5–16. RTD type point programming: Display Scale screen
a. Tag: You can assign a tag with a maximum of 20 characters to each
programmed point. Press the text box and use the keyboard to
enter the point tag.
b. Degree: Select degrees in Celsius (C), Fahrenheit (F), or Kelvin (K).
Thermo Fisher Scientific