Thermo Scientific SmartView SV100A User Manual page 105

Thermo Fisher Scientific
Figure 6–11. Stop Mode – Collect Count Samples
 Switch Trigger: If you select Switch trigger, press the input
box. Enter the switch you want to designate and press OK.
This trigger type also opens the Stop Mode section. Refer to
Figure 6–12. In this figure, the recorder collects data until
switch 1 opens. In Figure 6–13, switch 1 remains closed and
the recorder collects history until 100 samples are collected.
Figure 6–12. Switch Trigger – Switch Open
Figure 6–13. Switch Trigger – Collect Count Samples
3. Press Apply to save the screen configuration.
Screen Types
Horizontal & Vertical Trend Screens
SV100A/SV10AC User Guide 6-7