Thermo Scientific SmartView SV100A User Manual page 81

Thermo Fisher Scientific
c. Press Next.
d. Alarm Limits screen: Refer to the Similar Programming Parameters
section for instructions.
e. Press Apply.
 High-Low Difference: This calculated type point takes the difference
between the lowest and highest values in a range of points. The final
data for a high-low difference point type is derived by subtracting the
lowest point data in the range of points from the highest data.
1. Type screen: Select High-Low Difference > Next.
Figure 5–23. High-Low Difference Calculated type point programming: Type
screen
2. Display Scale screen: Refer to the Similar Programming Parameters
section for instructions.
Point Programming
Programming
SV100A/SV10AC User Guide 5-23