Log Linear - Thermo Scientific SmartView SV100A User Manual

Thermo Fisher Scientific
Note Kelvin is not supported in this release; however, an Equation type
point may be used to convert temperatures in Celsius or Fahrenheit to
Kelvin. ▲
c. Colors Block: Refer to the Similar Programming Parameters section
d. Display Block: Refer to the Similar Programming Parameters
e. Press Next.
3. Parameters screen: Refer to step 0 in the Linear type point
programming section to set up a filter. Press Next when complete.
4. Alarm Limits screen: Refer to the Similar Programming Parameters
section for instructions.
5. Press Apply to save changes.

Log Linear

1. Type screen: Refer to step 1 in the Linear type point programming
section and press Next to continue.
2. Display Scale screen:
Figure 5–17. Log Linear type point programming: Display Scale screen
a. Text and Colors blocks: Refer to the Similar Programming
for instructions.
section for instructions. Note that the only available options for
Decimal Fix are 0 and 1.
Parameters section for instructions.
Point Programming
Programming
SV100A/SV10AC User Guide 5-15