Date & Time - Thermo Scientific SmartView SV100A User Manual

The Program Menu
Date & Time
Date & Time
4-2 SV100A/SV10AC User Guide
b. Saver Intensity: Select the level of screen saver intensity.
3. Show Point Number: Select whether the digital blocks will display the
point number.
4. Show Point Tag: Select whether the digital blocks will display the point
tag.
5. Auto Speed: Enable auto speed if you want the chart speed to switch to
high when any point alarm is detected.
6. Alarm Blink: Select whether the point digital display boxes will blink
for operator notification if alarm states are active on the points.
7. Clear Unit at Startup: Enabling this function clears the historical trend
data used to restore the first active trend screen type when the unit is
power-cycled. Added for nuclear power plant simulator training.
8. Chart Speed Unit: Select the desired units.
Figure 4–3.
1. Daylight Saving: Enable or disable the time-of-day clock to
automatically adjust for Daylight Savings Time (DST).
Note If DST mode is selected, the recorder will automatically adjust the
time-of-day based on either the pre-2007 or 2007 DST standard. ▲
2. Display Format: Select American (mm/dd/yyyy) or European
(dd/mm/yyyy) date format.
Thermo Fisher Scientific