Electronics Module
The printer's main electronics and power supply are enclosed in a metal case called
the Electronics Module. The rear panel allows access to the Electronics module,
RAM, and NVRAM chips. The printer's hard drive is mounted on the rear panel.
When installing a new electronic module in the printer, the following components
need to be transferred from the old board.
1. Hard Drive (optional)
2. Memory (RAM) DIMM 1 and DIMM 2
Service Manual
3
2
1
4
3. Configuration Card (Installed from the
side under the interface cover.)
4. NVRAM
s8400-135
1-7