Electronics Module - Xerox Phaser 8400 Service Manual

Electronics Module

The printer's main electronics and power supply are enclosed in a metal case called
the Electronic's Module. The rear panel allows access to the Electronic's module,
RAM, and NVRAM chips. The printer's hard drive is mounted on the rear panel.
When installing a new Electronic Module in the printer, the following components
need to be transferred from the old board.
3
1. Hard Drive (optional)
2. Memory (RAM) DIMM 1 and DIMM 2
General Information
2
1
4
s8400-135
3. Configuration Card (Installed from
the side under the interface cover.)
4. NVRAM
1-7