18
Display Control
In the Display setting menu, you can set the type, persistence time, waveform
intensity, grid type, grid brightness, and etc. Click or tap the function navigation icon
at the lower-left corner of the screen, and then select Display to enter the
"Display" menu. You can also click or tap the
Waveform View to enter the "Display" menu.
18.1
Display Type
This series oscilloscope provides the "Victor" display mode in which the sample points
are connected by lines and displayed. In most cases, this mode can provide the most
vivid waveform for you to view the steep edge of the waveform (such as square
waveform).
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 18.1 Display Setting Menu
Display Control
icon at the upper-right of the
HDO1000 User Guide
207