RIGOL
To Specify the Display Type
Press Display to open the display menu and press Type to set the waveform display
mode to "Vectors" or "Dots".
Vectors: the sample points are connected by lines and displayed. Normally, this
mode can provide the most vivid waveform to view the steep edge of the
waveform (such as square waveform).
Dots: display the sample points directly. You can directly view each sample point
and use the cursor to measure the X and Y values of the sample point.
12-2
800.544.2843
www.calcert.com
15
10
20
5
25
0
30
Chapter 12 Display Control
MSO4000/DS4000 User's Guide
sales@calcert.co