Removing Endshields - MacDon D65 Operator's Manual

3. Push in shield to engage lower latch (A).
4. Use tool (B) to lock lower latch (A).
5. Replace tool (B) and lynch pin (A) on top pin (C).

Removing Endshields

To remove an endshield, follow these steps:
1. Open endshield. See
2. Remove acorn nut (A) that secures the endshield to
support (B).
3. Lift endshield off support (B).
169594
OPERATION
Opening Endshields, page
Figure 4.11
Figure 4.12
37.
Figure 4.13
39
Rev. C