5 Optional Kits
The following kits are available through your MacDon Dealer. The Dealer will require the bundle number for pricing
and availability.
5.1 Options and Attachments
5.1.1 Tall Crop Divider Kit
Tall crop dividers attach to the ends of the self-propelled
disc header for clean crop dividing and cutterbar entry in tall
crops. The kit includes left and right dividers and attachment
hardware.
MD #B5800
Figure 5.1: Left Side Tall Crop Divider
5.1.2 No Roll Conditioner Kit
The R113 self-propelled disc header can be operated without a roll conditioner installed. Kit includes required rear
windrow shielding and curtain for operating header without a roll conditioner.
MD #B5818
5.1.3 Polyurethane Roll Conditioner Kit
Rolls condition the crop by crimping and crushing the stem in several places, which allows the release of moisture
resulting in faster drying times. A polyurethane roll conditioner is better suited for crushing stems while providing
reduced crimping and is recommended for alfalfa, clover, legumes, and similar crops. The kit includes the
conditioner and installation hardware.
MD #B5754
5.1.4 Steel Roll Conditioner Kit
Rolls condition the crop by crimping and crushing the stem in several places, which allows the release of moisture
resulting in faster drying times. Steel rolls with a larger gap (up to 25 mm [1 in.]) may be desirable for thick stemmed
cane-type crops; however, too large a gap may cause feeding problems. Steel rolls are recommended for these
types of situations. The kit includes the conditioner and installation hardware.
MD #B5755
181
214077
Revision A