Table of Contents
Advertisement
B0059001 / Rev. 2.3
Pos: 82 /Sc hweis snaht/ Senso ren/N S9/N S9 NH-EC8x18 NT10- 100- S Tech nis che Date n @ 1\mod _123 729 912 4515 _50 1.docx @ 829 4 @ 2 @ 1
9.9
Combination sensor NS9NH-EC8x18NT10-100-S
Special feature: extra narrow sensor element, contact with tube <30 mm,
Technical data
Application:
Diameter of tube:
Wall thickness:
Measuring principle:
Width of measuring patch:
Ambient temperature:
Class of protection:
Weight:
Material of enclosure:
Sensor cable:
Air gap between pole boots
and tube surface
Air gap between sensor
element and tube surface
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
ideal for corrugated tubes.
Round material (ferrous / non-ferrous tubes)
10 - 250 mm
Up to 1.5 mm
Eddy current, with pre-magnetization
4 mm
10 - 40 °C (50 - 104 °F) (operation)
IP53
6.6 kg (14.5 lbs.)
Aluminum, nickel plated
KNS9S (electro magnet)
CECM18S-G (eddy current)
0.2 ... 0.25 mm in new condition
0.1 ... 0.35 mm is permissible range
0.6 ... 0.65 mm in new condition
0.3 ... 0.75 mm is permissible range
Manual
The air gaps must be within the permissible
range.
If the value gets – due to wearing - outside the
permissible range, the sensor needs to be
repaired (also see chapter 10 "Maintenance").
Technical data
99
Advertisement
Table of Contents
