Maintenance
•
Establish a Telnet connection.
•
Enter: ndcucfg.
•
Type the following commands and confirm each by pressing „Enter":
reg save
quit
The changes are now saved.
•
Restart the application:
140
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Manual
Start application SND40_10
1:
Open the Windows Explorer by
double click the icon "My
Device".
Start application SND40_10
2:
Please execute "FFSDISK".
B0059001 / Rev. 2.3