Table of Contents
Advertisement
Technical data
• 1 relay output (change-over contact)
• 1 relay output (closing contact), additionally only for SND40...MF... units
Specification for Ohmic load:
− max. switched voltage:
− max. switched current:
− max. contact rating:
• USB 1.1 interface (front side)
PCL3 compatible for printer, e.g. HP Deskjet HP5650, hp5652, hp6540
(other models must be registered in the operating system)
for USB stick for software updating and backup of the program data,
not until distribution with PC assembly NetDCU5.2 (approx. April 2006)
• 10 Mbit Ethernet interface (internal)
for general system access via TCP/IP (telnet)
IP address for Telnet 192.168.100.107, Subnet 255.255.255.000 (on delivery)
IP address for remote host 192.168.100.222 (on delivery)
• Fieldbus interface
− Profibus DP interface, according to EN 50170, protocol v.1.10,
max. Baud rate 12 Mbit/s
− ProfiNet IO interface
− CC-Link interface
Pos: 69 /Sc hweis snaht/ Geräte/ SN D40/2 Te chni sche Daten/ Versionen des Auswertegerä tes @ 0\mo d_1 1317 139 6850 2_5 01.do cx @ 94 9 @ 3 @ 1
88
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
30 V DC / 250 V AC
50 mA
180 W / 1500 VA
Manual
B0059001 / Rev. 2.3
Advertisement
Table of Contents
