Table of Contents
Advertisement
Maintenance
At this point, also existing files are renamed first to "ProgramXX.cfg.old" before the backed up files
are copied back. Existing program files which are not contained in the saved data remain
unaffected by this process. In contrast to restoring the system files, there is no check of the
measurement mode of the SND40 device and saved program files.
10.5.3.4 Button „Exit"
By pressing this button, the backup program is terminated and the main menu of the SND40
application appears without restarting of the SND40 device.
Pos: 118 /Schweis snah t/Gerä te/SN D40/1 0 Wa rtun g/Ein stelle n der System zeit / Datum @ 2\mod_1 322 649 9458 26_ 501.do cx @ 1 0293 @ 2 @ 1
10.6
Setting the System Time / Date
The system time / date is a component of the Windows operating system, it is set in the system
control as for every other PC with Windows OS.
•
Connect a USB keyboard (if available), otherwise use the touchscreen.
•
Terminate the SND40 program (ESC key on screen keyboard), the Windows desktop then
appears.
•
Click in the left bottom corner of the screen to make the
taskbar visible.
136
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Manual
B0059001 / Rev. 2.3
Advertisement
Table of Contents
