Roland R4000 Manual page 132

Maintenance
10.5.3 Starting the program
SND40StoreV2 is implemented as a stand-alone program, but can be started directly from the
SND40 application without the need to exit it (as of version A5-V2.15 of SND40_10.exe).
Fig. 78: To start the program press the "Backup" button from the main menu of the SND40 application.
132
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Note For all functions, the corresponding backup USB stick
should already be connected before selecting a function,
this facilitates the subsequent functional sequence.
Manual
B0059001 / Rev. 2.3