Table of Contents
Advertisement
B0059001 / Rev. 2.3
•
In the Start menu, under „Settings" choose the „Control Panel".
•
In the Control Panel press, resp. click on the „Stylus" icon.
•
Click on the "Calibration" tab.
•
Operate the "Recalibrate" key.
•
Calibrate the display according to the instructions.
•
After the calibration process close the calibration window and return
to the start screen.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Manual
Maintenance
139
Advertisement
Table of Contents
