Roland R4000 Manual page 46

Electrical installation
4.9.1 Profibus DP Connection
A Profibus-DP module is installed in units of the type SND40-(EC)-(MF)-PR.
Fig. 25: Mainboard Profibus module
Connection to the Profibus may only be done by an electrician.
46
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Note:
For use as Profibus cable, the type "Unitronic® BUS FD P L2/FIP"
(1 x 2 x0.64 mm², supplier: Lapp) or an equivalent / better cable is suitable.
For usage in severely interference loaded environs a separate shielding might be
required.
Manual
Mainboard SND40
View of the Profibus DP module
(type Anybus S, Supplier: HMS
Industrial Networks).
For further details about Profibus
interface please read chapter
"Technical data".
B0059001 / Rev. 2.3