Safety Advice; Safety Instructions And Warnings For User; Declaration Of Icons - Roland R4000 Manual

B0059001 / Rev. 2.3
1

Safety advice

Pos: 8 /Komponenten a llgemei n/Si che rheit shi nweise @ 2\mo d_13 165 260 3346 9_5 01.do cx @ 10 093 @ 2 @ 1
1.1

Safety instructions and warnings for user

This manual contains all information required for the correct operation of the Roland Electronic
equipment. It has been written for technically qualified personnel.
Unauthorized tampering with the unit, especially ignoring the warnings in this handbook, can cause
malfunction and damage to the unit. Only authorized personnel should be allowed to make
changes to the unit and perform cable connections especially the power supply.
Should it be necessary, e.g. in case of service or repair, to make measurements within the unit,
then all customary accidents prevention procedures should be observed. Only professional
electrical tools should be used.
Pos: 9 /Komponenten a llgemei n/Symbo lerklä ru ng SND4 0_un d_G3 @ 4\mod _14 8231 364 939 9_50 1.docx @ 415 83 @ 2 @ 1
1.2

Declaration of icons

Pos: 10 /Feldbus a llgeme in/Feldbu sbeg riffe @ 0\mod _118 960 919 7140 _50 1.docx @ 463 9 @ 2 @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Note
The factory pre-settings – especially the upper / lower limit values – have
been chosen such that an optimal machine protection is ensured.
Diverging settings can impair the machine protection.
Safety advice for persons with cardiac pacemakers!
Persons with cardiac pacemakers are to stay away from the sensors!
The strong magnetic / electromagnetic fields of the sensors can cause malfunction
of cardiac pacemakers and other such apparatus!
Warning - general dangers!
Reference to imminent hazards, which can result in severe bodily harm or death.
Warning - dangers by high voltage!
Reference to imminent hazards due to electricity, which can result in severe bodily
harm or death.
Attention - Damage of construction units!
Reference to a potential imminent situation, which can result in damage to the
product or environs.
Note
Useful reference to an application or deepening information.
Manual
Safety advice
9