Table of Contents
Advertisement
Operation
7.6
Statistics function
Evaluation of detection results.
At the left side the events are shown in the rank of appearance, at the right side the accumulation
of events since the last reset.
Fig. 41: Statistics function
•
Setting the "Statistics" system parameter to "on" activates the statistics function.
•
Setting the "Create SN file" system parameter to "on" activates storing the statistics values in a
log book file.
Pos: 55 /Sc hweis snaht/ Geräte/ SN D40/8 Bet rieb/ Log-Date ien @ 0\mod _11 8666 933 676 5_50 1.docx @ 450 8 @ 3 @ 1
74
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Resets the event table.
Exits the statistics function.
Manual
Prints out the signal progression and the
parameter list.
No key function in this mode.
No key function in this mode.
No key function in this mode.
B0059001 / Rev. 2.3
Advertisement
Table of Contents
