Table of Contents
Advertisement
Technical records
11.2.4.1 Exchanging the processor module
Fig. 86: Exchanging the processor module
•
Remove the module carefully. Grab the module with both hands (index finger and middle
finger) and carefully lift the module off its socket.
•
Insert the new module with the same orientation. The pin strip always points towards the unit
floor.
•
Before inserting the module into the socket, take care that on both sides plugs and sockets
match.
160
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Manual
B0059001 / Rev. 2.3
Change of components
1: Processor module
Advertisement
Table of Contents
