Roland R4000 Manual page 131

B0059001 / Rev. 2.3
Fig. 77: Program interface of SND40StoreV2.exe
The program interface of SND40StoreV2 contains on the left side the buttons for function selection
as well as on the right side a brief description of the function in English.
10.5.2 Function description
The program contains 3 different functionalities, which are described in detail below:
1. Backup of all system and program configuration files. Actually following files are included:
- System.cfg
- SystemEx.cfg
- Program1.cfg - Program255.cfg (if available)
2. Restore the system configuration files
3. Restore the program configuration files
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Note The language of the program interface is in English.
Manual
Maintenance
131