Table of Contents
Advertisement
Maintenance
10.5
SND40StoreV2
SND40StoreV2 is an easy-to-handle aid for saving / restoring program and system files.
Requirements:
Hardware version of the SND40, based on processor module NetDCU10
•
USB-Stick (attached and located inside the unit)
•
Fig. 76: Position of USB stick and spare fuse inside of unit
The program replaces the previous backup program of the SND40 device "SND40_10Store.exe"
and its English version "SND40_10StoreENU.exe". The programs mentioned above are among
others no longer able to backup and restore advanced system configuration and programs with
numbers higher than 31.
10.5.1 Definitions
Term
SND40 program directory
Backup root directory
Backup directory
130
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Explanation
Folder on the SND40 device containing all the program,
utility, configuration and data files associated with the SND40
application.
Folder containing one or more backup directories.
This folder contains the backup files of a specific backup
operation.
Manual
SND40_USB-Stick_und_Sicherung.JPG
B0059001 / Rev. 2.3
Position of
X
spare fuse
Position of
Y
USB stick
Advertisement
Table of Contents
