B0059001 / Rev. 2.3
•
In the Start menu, choose under „Settings" the „Control Panel".
•
In the Control Panel press or click on the "Date/Time" icon.
•
Change the system time / date (as for any other Windows PC).
•
Clicking on the Apply key validates the changes.
•
Go back to the Windows Desktop and choose in the Start menu
under „Programs" the „Command Prompt".
•
Enter: ndcucfg
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Manual
Maintenance
137