Connection Schedule - Combination Sensors - Roland R4000 Manual

B0059001 / Rev. 2.3
4.7

Connection schedule - Combination sensors

Fig. 22: Connection schedule – Combination sensors
Pos: 33 /Sc hweis snaht/ Geräte/ SN D40/5 E lektrisc he In stal lation/ An schl uss plan W irbe lst romse nso ren @ 0\mod _11 2920 733 165 6_50 1.docx @ 812 @ 2 @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Note:
For cables delivered starting Nov. 2014 following applies:
*Contact Nr. 8 might be connected with the cable shield.
** A brown wire might be connected parallel together with a
blue wire. This will not affect the proper functionality of the cable,
the sensor or the control unit.
Manual
(+blue)
Electrical installation
43