Levelling The Header - MacDon D65 Operator's Manual

OPERATION

4.12 Levelling the Header

Windrower linkages are factory-set to provide the proper level for the header and should not normally require
adjustment. The float springs are NOT used to level the header.
If the header is not level, check the tire pressures on the windrower to ensure that the tires are properly inflated. For
instructions, see the windrower operator's manual.
If the header is still not level, then adjustment to the windrower linkages is required. Refer to the appropriate section
in your windrower operator's manual.
83
169594 Rev. C