Levelling The Header - MacDon R85 Operator's Manual

OPERATING THE HEADER

4.14 Levelling the Header

Windrower linkages are factory-set to provide the proper level for the header and should not normally require
adjustment. The float springs are NOT used to level the header.
If the header is not level, check the tire pressures on the windrower ensuring they are properly inflated. Refer to
your windrower operator's manual.
If the header is still not level, then adjustment to the windrower linkages is required. Refer to the appropriate section
in the windrower operator's manual.
96
147757 Revision B