Options And Attachments; Hydraulic Header Angle Kits-Pull-Type; Additional Skid Shoes; Gauge Roller Kit - MacDon A30-S Operator's Manual

9 OPTIONS AND ATTACHMENTS

9.1 HYDRAULIC HEADER ANGLE
KITS-PULL-TYPE
This kit allows the header angle to be adjusted
hydraulically with a
standard mechanical link. A separate hydraulic
circuit is required or the existing APT steering
cylinder hydraulic
depending on the tractor hydraulics. Installation
instructions are included with the kits.

9.2 ADDITIONAL SKID SHOES

In addition to the standard two outer skid shoes,
two inner skid shoes may be added for extra
control of cutting height and protection of cutting
components.

9.3 GAUGE ROLLER KIT

The gauge roller kit replaces the outer skid shoes
and consists of rollers in place of skid shoes.
They can be adjusted for varying cutting height.
Form # 169000
OPTIONS AND ATTACHMENTS
cylinder replacing the
circuit can be utilized,
9.4 REPLACEMENT REEL BAT
KITS-
A30-S & A30-D
Consists of one complete bat assembly for ease
of replacement.
9.5 STUB GUARD CONVERSION
KIT
Stub guards, complete with top guides and
adjuster plates are designed to cut tough crops.
Installation and adjustment instructions are
included with the kit.

9.6 TALL CROP DIVIDER KIT

The tall crop dividers attach to the ends of the
header for clean crop dividing and reel entry in
tall crops. The kit includes left and right dividers,
lean bar extensions and attachment hardware.
168
Model Year - 2009