Detaching Header From Windrower - MacDon D65 Operator's Manual

5.2 Detaching Header from Windrower

To detach the header from the windrower,
these steps:
1. Fully lower the reel.
2. To disconnect the reel hydraulics, push in lock
button (A) and pull handle (B) to disengage
multi-coupler (C) from header receptacle.
3. Route hose bundle back onto windrower and store
multi-coupler (C) on hose support.
4. Close cover on header receptacle (A).
5. To disconnect header drive hydraulics, disengage and
rotate lever (A) counterclockwise to fully up position.
6. Disconnect electrical connector from header.
169594
HEADER ATTACHMENT/DETACHMENT
follow
108
Figure 5.8: Disconnect reel hydraulics
Figure 5.9: Close cover
Figure 5.10: Disconnect header drive hydraulics
Rev. C