Attaching The Header: M150, M155, Or M155E4 Windrowers - MacDon R85 Operator's Manual

15. Connect the electrical harness (A) from windrower to
the electrical connector on the header.
NOTE:
Hydraulic lines and hoses hidden on illustration
to show the electrical connection.
16. Move platform (A) to the CLOSED position.

3.7.4 Attaching the Header: M150, M155, or M155E4 Windrowers

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
Refer to your windrower operator's manual for procedures to mechanically attach the header to the windrower. Refer
to the following procedures for electrical and hydraulic connections.
NOTE:
The M150, M155, and M155E4 Self-Propelled Windrowers require the disc drive manifold kit (MD #B4657) to
hydraulically connect the R85 13-foot header.
147757
OPERATION
Figure 3.48: Windrower Connections
Figure 3.49: Top View of Windrower
50
Revision B