Removing And Installing Oil Pan - Skoda FABIA II 2007 Workshop Manual

FABIA II 2007 ➤
Automatic 6-speed gearbox 09G - Edition 05.07
1.1.3 Components at wiring loom of 8-pin plug
1 - Hydraulic pressure sender
1 -G193-
❑ not available
2 - Plug connection for gearbox
input r.p.m sender -G182-
3 - Cables for gearbox input
r.p.m sender -G182-
4 - Hydraulic pressure sender
2 -G194-
❑ not available
5 - Cables at gearbox input
r.p.m sender - G195-
6 - Plug connection for gearbox
output r.p.m sender - G195-
7 - Holder for the gearbox oil
temperature sender -G93-
8 - Gearbox oil temperature
sender -G93-
❑ is integrated in the wir‐
ing loom
⇒ Item B (page 56)
A - 8-pin plug
B - Wiring loom for 8-pin plug
❑ removing and installing
wiring loom for 8-pin
plug ⇒ page 71
C - Bracket for wiring loom
D - 7 Nm
E - 7 Nm
1.2

Removing and installing oil pan

Special tools and workshop equipment required
♦ Protective goggles
Note
General repair information
Removing the oil pan
– Remove noise insulation ⇒ Body Work ⇒ Rep. Gr. 50 .
– Position the catch pan under the gearbox.
WARNING
Wear safety goggles.
56
Rep. Gr.38 - Wheels, Control
⇒ page 3 .