2
Removing, installing and setting mul‐
ti-function switch -F125-
2.1
Removing and installing the multi-func‐
tion switch -F125-
Removing
– Shift selector lever to position "N".
– Switch off ignition.
– Remove air filter ⇒ Engine ⇒ Rep. Gr. 24 .
– Lever off the selector lever control cable -1- from the gearshift
lever -6-, e.g using an open-end wrench, while ensuring that
the selector lever control cable does not get kinked.
Note
Do not release screw -2-.
– Unplug connector -5- at multi-function switch.
– Remove gearshift lever -1-.
Automatic 6-speed gearbox 09G - Edition 05.07
2. Removing, installing and setting multi-function switch F125
FABIA II 2007 ➤
75