Removing And Installing The Drive Shaft, Output Shaft, Differential Gear, Shift Mechanism And Gearshift Forks - Skoda FABIA II 2007 Workshop Manual

4.5 Removing and installing the drive shaft, output shaft, differential gear, shift
mechanism and gearshift forks
1 - Differential gear
❑ disassembling and as‐
sembling ⇒ page 154
2 - Gearbox housing
❑ is made out of alumini‐
um or magnesium
⇒ page 1
❑ on gearboxes made out
of aluminium as of pro‐
duction date 12.06 the
adjusting washer S 1 for
outer ring/tapered-roller
bearing is not fitted
⇒ page 159
❑ Bearing pedestal for
outer ring/tapered-roller
bearing is adapted
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
Parts
❑ repairing ⇒ page 126
3 - Oil drain plug
❑ different versions:
Oil drain plug with inter‐
nal serration - 24 Nm
Oil drain plug with hexa‐
gon socket head - 32 Nm
4 - Flange shaft with pressure
spring
❑ removing and installing
⇒ page 118
❑ complete ⇒ page 154
5 - Conical screw, 25 Nm
6 - 5 Nm + 90° further
❑ self-locking
❑ always replace ⇒ Electronic Catalogue of Original Parts
❑ to secure the bearing support for grooved ball bearing with the drive shaft and output shaft -Pos. 16-
7 - 23 Nm
❑ for gearshift mechanism -Pos. 15-
❑ self-locking
❑ always replace ⇒ Electronic Catalogue of Original Parts
8 - O-ring
❑ always replace ⇒ Electronic Catalogue of Original Parts
9 - Bearing pins
10 - 5 Nm + 90° further
❑ always replace ⇒ Electronic Catalogue of Original Parts
11 - Gearshift shaft with cover
❑ disassembling and assembling
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
⇒ page 130
Gearbox 02T - Edition 05.2014
4. Disassembling and assembling the gearbox
117