Skoda FABIA II 2007 Workshop Manual page 214

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02R - Edition 08.2014
9 - Clutch pedal
❑ removing and installing with over-centre helper spring
⇒ "1.12 Removing and installing the clutch pedal with the over-centre helper spring (Rapid) ",
page 38
10 - Bushing
11 - Cap
12 - Support
❑ only replace if the master cylinder has been removed
❑ removing and installing
13 - Master cylinder
❑ removing and installing
⇒ "1.18 Removing and installing the master cylinder (Fabia II 2011 ►; Roomster 2011 ►; Rapid 2011 ►;
Rapid NH)", page 50
14 - Clamp
❑ to remove and install the tube-hose line pull out retaining clip up to the stop
❑ is pulled out from the side on certain master cylinders
15 - Gasket
❑ always replace ⇒ Electronic Catalogue of Original Parts
❑ stick onto the master cylinder
16 - Supply hose
❑ out of plastic ⇒ page 26
Plastic return hose -1-
• The gaskets -2- must be located in the return hose.
1.6.1 Removing and installing clutch pedal
switch - F36-
Note
The clutch pedal switch - F36- may only be installed once to en‐
sure that it has an adequately tight fit in the bracket for clutch
pedal.
Removing
– Removing the footwell vent ⇒ Heating and Air Conditioning;
Rep. gr. 80 .
Note
The clutch pedal switch is installed from the front wall.
26
⇒ "1.15 Summary of components - Hydraulic (Rapid) ", page 44