Repairing Shift Mechanism - Skoda FABIA II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
6

Repairing shift mechanism

Special tools and workshop equipment required
♦ Thrust piece - T10203-
♦ Pipe section - MP3-479 (VW 423)-
1 - Bushing
❑ for gearshift shaft
❑ pressing in and pressing
out ⇒ page 126
2 - Gearshift shaft with cover
❑ replace jointly
3 - Locking bolt
❑ for setting the gearshift
mechanism
❑ removing ⇒ page 131
❑ inserting ⇒ page 131
4 - Reversing lever
❑ Fitting position
⇒ page 84
❑ as of 06.07 the relay lev‐
el is made of plastic
❑ Removing and installing
plastic relay lever to‐
gether with cable lock
⇒ page 87
❑ If the relay lever is made
of plastic, neither the
bushings -Pos. 5- nor
the lock washer
-Pos. 10- are required
5 - Bushing
❑ is not required, if the re‐
lay lever is made of plas‐
tic
6 - Sealing ring
❑ release with a screw‐
driver
❑ installing ⇒ page 131
7 - Cap
❑ for gearbox bleeder
8 - Gearshift lever
❑ insert in such a way that the interrupted spacing of the teeth matches the gearshift shaft
❑ may be replaced with the gearshift mechanism mounted
❑ Fitting position ⇒ page 84
9 - 20 Nm
❑ self-locking
❑ always replace ⇒ Electronic Catalogue of Original Parts
10 - Lock washer
❑ always replace ⇒ Electronic Catalogue of Original Parts
❑ is not required, if the relay lever is made of plastic
130