3
Check gear oil level
Gearbox oil specification ⇒ Electronic Catalogue of Original
Parts .
– Remove noise insulation ⇒ Body Work ⇒ Rep. Gr. 50 .
– Unscrew plug for inspecting gear oil -arrow-.
The oil is at the correct level if the gear is filled up to the lower
edge of the oil filler hole.
– Screw in the screw of the filler hole -arrow- and tighten to
tightening torque
⇒ page 108
If re-filling, do the following:
– Unscrew plug for inspecting gear oil -arrow-.
– Pour in gear oil up to lower edge of filler hole.
– Screw in plug -arrow-.
– Start engine, engage a gear and allow gearbox to rotate for
about 2 minutes.
– Switch off engine, unscrew plug -arrow- and once again top
up gear oil to lower edge of the filler hole.
– Screw in the screw of the filler hole -arrow- and tighten to
tightening torque
⇒ page 108
– Install the noise insulation ⇒ Body Work ⇒ Rep. Gr. 50 .
.
.
FABIA II 2007 ➤
Gearbox 02R - Edition 12.06
3. Check gear oil level
85