Removing And Installing Shift Mechanism - Skoda FABIA II 2007 Workshop Manual

Lever off cable lock for selector cable from plastic relay lever.
• Relay lever removed.
– Insert cross-head screwdriver -A- between bushing -B- and
relay lever.
Press on cable lock
• Relay lever removed.
• The cable lock must only be pressed onto the bushing
-arrow-.
• Cable lock must move freely on relay lever.
• The cable lock must be located behind the pin detent
⇒ page 64 .
1.8 Removing and installing shift mecha‐
nism
Special tools and workshop equipment required
♦ Disassembly wedge -3409 -
♦ Grease -G 000 450 02-
1.8.1 Removing
Note
If the battery earth strap is disconnected and re-connected, carry
out additional operations ⇒ Electrical System ⇒ Rep. Gr. 27 .
– Remove air filter ⇒ Engine ⇒ Rep. Gr. 23 or ⇒ Engine ⇒
Rep. Gr. 24 .
– Remove battery and battery tray ⇒ Electrical System ⇒ Rep.
Gr. 27 .
FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
1. Shift mechanism
65