Summary Of Components - Hydraulics - Skoda FABIA II 2007 Workshop Manual

1.12

Summary of components - Hydraulics

1 - Brake fluid reservoir
❑ test tightness
⇒ page 35
2 - Tubing
❑ out of rubber
❑ as of 12.05 on certain
vehicles out of plastic
⇒ page 35
❑ if the return hose is
made out of plastic, do
not use hose clamp -
MP7–602-
❑ test tightness
⇒ page 35
3 - Master cylinder
❑ removing and installing
⇒ page 36
❑ after installing, bleed the
clutch control
⇒ page 44
❑ test tightness
⇒ page 35
4 - Locking clip
❑ to remove the tube-hose
line Pos. 9 pull out of the
master cylinder Pos. 3
up to the stop
5 - Support
❑ only replace if the mas‐
ter cylinder Pos. 3 has
been removed
❑ removing ⇒ page 34
❑ installing ⇒ page 34
6 - Clutch pedal
❑ removing and installing
7 - 28 Nm
❑ always replace ⇒ Electronic Catalogue of Original Parts
8 - O-ring
❑ always replace
❑ Difference between the O-rings
❑ assign according to the ⇒ Electronic catalogue of original parts .
❑ moisten with brake fluid before installing
❑ test tightness ⇒ page 35
9 - Tube-hose line
❑ assign according to the ⇒ Electronic catalogue of original parts .
❑ test tightness ⇒ page 35
10 - Support
❑ at front left frame side rails
❑ for clipping in the tube-hose line Pos. 9
⇒ page 18
⇒ page 34
FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
33