Removing And Installing The Master Cylinder - Skoda FABIA II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
1.19 Removing and installing the master cyl‐
inder (Fabia II 2007 ►; Roomster 2006
►)
Special tools and workshop equipment required
♦ Pliers - T10005-
♦ Hose clamp - MP7-602 (3094)-
1.19.1 Removing
Note
If the battery earth strap is disconnected and connected, carry out
additional operations ⇒ Electrical System; Rep. gr. 27 .
– Disconnect the battery-earth strap with the ignition off ⇒ Elec‐
trical System; Rep. gr. 27 .
– Remove engine cover ⇒ engine; Rep. gr. 10 .
– Remove air filter ⇒ Engine; Rep. gr. 23 or ⇒ Engine; Rep.
gr. 24 .
– Remove battery and battery tray ⇒ Electrical System; Rep.
gr. 27 .
– Pinch off return hose -A- to master cylinder with hose clamp -
MP7-602 (3094)- (if the return hose is made out of plastic, do
not use the hose clamp - MP7-602- , otherwise the return hose
can get damaged).
– Release the return hose -A- to the brake fluid reservoir and
shut it off in a suitable manner.
– Pull locking clip -B- out of the master cylinder.
– Release and cut the tube-hose line -C- out of the master cyl‐
inder.
– Remove the storage area on the driver's side ⇒ Body Work;
Rep. gr. 70 .
– Remove crash strut for clutch pedal (if present)
– Remove clutch pedal switch, if provided,
Note
To remove the master cylinder completely remove the clutch con‐
trol. Before removing first separate the master cylinder from the
clutch pedal.
– Unlock the actuating rod/master cylinder from the clutch pedal.
58
⇒ page 22 .
⇒ page 19 ,-Pos. 7-.