Tightening Torques (Rapid Nh) - Skoda FABIA II 2007 Workshop Manual

Components
Flange shaft on gearbox (conical screw)
Fixing screws of engine mount
Pendulum support
Drive shaft to flange shaft
Heat shield for drive shaft to engine
Steering joint to track control arm
Wheel bolts
1)
Always replace these bolts.
2.6

Tightening torques (Rapid NH)

Attach gearbox to engine (flange fig. gearbox)
Pos. Screw
1 M12 x 50
1) M12 x 150
2
3 M10 x 55
4 M12 x 60
2) M6 x 8
5
A
1)
Screw with threaded pin M8.
2)
Attachment of cover plate for flywheel.
Pendulum support
Note
Position the screws -1- in the elongated holes of the pendulum
support in such a way that there is maximum distance between
the gearbox and the assembly carrier.
Components
Gearbox console to gearbox
Fixing screws to gearbox mount
Cable support to gearbox
Gearbox shift lever to gearbox
Slave cylinder to gearbox
bracket for tube-hose line
Flange shaft on gearbox (conical screw)
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Piece
2
2
3
1
1
Dowel sleeves for centering
1)
1)
Gearbox 02R - Edition 08.2014
Tightening torque
⇒ "2.1 Disassembling and assembling differential
gear", page 196
⇒ Engine; Rep. gr. 10
⇒ Engine; Rep. gr. 10
⇒ Chassis; Rep. gr. 40
⇒ Chassis; Rep. gr. 40
⇒ Chassis; Rep. gr. 40
⇒ Chassis; Rep. gr. 44
Nm
80
80
40
80
10
Tightening torque
40 Nm + 90°
40 Nm + 90°
⇒ "1.8 Summary of components - Control cables",
⇒ "1.8 Summary of components - Control cables",
⇒ "1.14 Summary of components - Hydraulic (Fabia
II ►; Roomster ►; Rapid NH) ", page 41
⇒ "1.14 Summary of components - Hydraulic (Fabia
II ►; Roomster ►; Rapid NH) ", page 41
⇒ "2.1 Disassembling and assembling differential
gear", page 196
2. Removing and installing the gearbox
page 74
page 74
125