Removing And Installing The Clutch Pedal; Fabia Ii - Skoda FABIA II 2007 Workshop Manual

FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
1.6 Removing and installing the clutch ped‐
al; Fabia II 2007 ?
Special tools and workshop equipment required
♦ Pliers -T10005-
♦ Polycarbamide grease -G 052 142 A2-
Removing
– Remove crash strut (if present)
– Remove clutch pedal switch
– Removing the over-centre helper spring
– Put steering wheel in the lower position.
– Unscrew nut -A-.
– Slowly turn steering wheel in a suitable position.
– Pull screw out of the bracket.
– Remove clutch pedal.
Install
Installation is performed in the reverse order, pay attention to the
following points:
– The support -A- must be located on the actuating rod -B- of
the master cylinder.
– To click in the support push the clutch pedal towards the front
wall -direction of the arrow- and make sure it catches correctly.
18
⇒ page 13 .
⇒ Item 7 (page 10) , if provided.
⇒ page 15 .