Replace Gasket Ring For Right Flange Shaft (Gasket Ring And Bushing Are One Component) - Skoda FABIA II 2007 Workshop Manual

– Drive the new seal ring in up to the stop, do not twist the seal
ring.
– Fill half the space between the sealing lip and dust lip with
sealing grease - G 052 128 A1- .
– Insert the flange shaft.
– Secure the flange shaft with the conical screw and tighten with
tightening torque.
– Bolt drive shaft to flange shaft ⇒ Chassis; Rep. gr. 40 .
– Install coupling rod and steering joint to track control arm ⇒
Chassis; Rep. gr. 40 .
– Check gear oil level, if necessary fill up to lower edge of filler
hole ⇒ "3 Check gear oil level", page 127
– Install the wheelhouse liner into the left wheelhouse ⇒ Body
Work; Rep. gr. 66 .
– Install the noise insulation ⇒ Body Work; Rep. gr. 50 .
– Install wheel ⇒ Chassis; Rep. gr. 44 .
Tightening torque
Flange shaft on gearbox (conical screw)
1.2 Replace gasket ring for right flange shaft
(gasket ring and bushing are one com‐
ponent)
Special tools and workshop equipment required
♦ Multi-purpose tool - MP3-419 (VW 771)-
♦ Extraction hook - MP3-419/37 (VW 771/37)-
♦ Assembly device - MP3-434 (3066)-
♦ Thrust piece - T10148-
♦ Catch pan
♦ Sealing grease - G 052 128 A1-
Removing
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Turn steering to full right lock.
– If present, remove heat shield for drive shaft from the engine
-arrows-.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
.
⇒ "2.1 Disassembling and assembling differential gear", page 196
Gearbox 02R - Edition 08.2014
1. Replacing the flange shaft gasket rings (gearbox assembled)
193