Removing And Installing Gearbox Housing Cover And 5Th Gear - Skoda FABIA II 2007 Workshop Manual

FABIA II 2007 ➤
Gearbox 02R - Edition 12.06
4.3

Removing and installing gearbox housing cover and 5th gear

1 - 18 Nm
❑ for cover to gearbox
housing
2 - Cover for gearbox housing
Note
3 - Gasket
4 - 80 Nm and torque a further
90°
❑ holds disc spring in po‐
sition with sleeve socket
on screw head
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
❑ Clean the threaded
holes for the fixing
screws of the synchron‐
izer body and the 5th
gear pinion using a
screw-tap in order to re‐
move locking agent res‐
idues; otherwise there is
a risk that the screws will
shear
5 - Disc spring
❑ installing ⇒ page 106
6 - 25 Nm
❑ for bearing pins on the
gearbox housing
7 - Bearing pins
8 - 5th gear shift fork
❑ disassembling and assembling
❑ adjust ⇒ page 107
9 - Spring
❑ Fitting position ⇒ page 120
10 - 5th gear sliding sleeve
❑ Fitting position ⇒ page 120
11 - Arresters
❑ (3 pieces)
❑ Fitting position ⇒ page 120
12 - Synchronizer body with sliding gear and synchronizer ring for 5th gear
❑ remove separately
❑ remove together with gearbox housing
❑ disassembling and assembling
13 - Needle bearing
❑ for 5th gear sliding gear
14 - 5th gear pinion
❑ remove separately
88
Rep. Gr.34 - Control, housing
⇒ page 117
⇒ page 91
⇒ page 96
⇒ page 120
⇒ page 91