Fitting location of gearbox shift lever
– When inserting the gearbox shift lever, make sure that the
tooth opening -arrow A- is located above the interrupted spac‐
ing of the teeth -arrow B- for the gearshift shaft.
Fitting location of relay lever
1 - Gearbox shift lever -1- with balancing weight
2 - The relay lever -2- is inserted over the sliding shoe -arrow- into
the guiding nut of the gearbox shift lever
1.7
Plastic relay lever as of 06.07
Removing
•
Gearbox shift lever is located in the neutral position.
•
Before removing the gearbox shift lever the cable lock must
be separated from the selector cable in order to avoid damage
to the selector cable.
– Pull forward the locking mechanism as far as the stop in
-direction of arrow 1-, then lock by turning to the left in
-direction of arrow 2-.
FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
1. Shift mechanism
63